Geometrical tolerances
Geometrical tolerances
| THICKNESS TOLERANCES | |
|---|---|
| Max. deviation from the nominal thickness | +/- 0.020 mm |
| Max. thickness difference parallel to the rolling direction within a strip section of 1,000 mm length | 0.025 mm |
| Max. thickness difference perpendicular to the rolling direction, measured at least 40 mm from the edge | 0.020 mm |
| WIDTHS TOLERANCES | |
|---|---|
| Full width | +/- 1 mm |
| Slit width* < 150 mm | 0/- 0.2 mm |
| > 150 – 400 mm | 0/- 0.3 mm |
| > 400 – 750 mm | 0/- 0.5 mm |
| > 750 – 1,000 mm | 0/- 0.6 mm |
* Plus tolerances must be specially agreed when ordering.